Buying the best treadmill for home in India can be an exciting journey, but the real work begins once it’s in your home. Proper care is essential to ensure your treadmill stays in top condition for years.
If you’re new to owning a treadmill online or offline, don’t fret! Keeping your treadmill running smoothly doesn’t require advanced mechanical skills. With these ten simple tips, you can maintain your treadmill effortlessly, ensuring it serves you well for the long haul.
Top 10 Tips to Keep Your Treadmill in Top Condition
Listed below are the top 10 proven tips to keep your treadmill in the best condition:
- Tip #1: Place Your Treadmill on a Flat Surface
For a smooth treadmill run, put it on a level surface. Uneven floors wear out the belt faster and cause it to drift. Most treadmills have adjustable feet to level them on uneven floors.
- Tip #2: Clean the Machine after Each Use
Wipe down your treadmill after each use to prevent sweat and corrosion. For the console, a weekly wipe with a damp cloth is enough.
- Tip #3: Clean the Belt (Monthly)
Remember to clean under the belt! Dirt buildup there wears down the belt faster. Use a vacuum or a soft, damp cloth to remove debris. Also, vacuum regularly around the treadmill.
- Tip #4: Clean the Areas under the Motor (Monthly)
Clean the motor area quarterly by vacuuming around it (or using a dry cloth according to your manual) after unplugging the treadmill. This helps maintain motor efficiency.
- Tip #5: Lubricate the Belt (When Needed)
Consult your treadmill’s user manual to see if and how often belt lubrication is needed. Most treadmills need silicone-based lubricant applied under the belt every few months.
- Tip #6: Tighten Belt (If Needed)
While many quality treadmills online or offline come pre-set with the correct belt tension, frequent use can gradually cause the belt to loosen over time. Most treadmills feature two bolts at the deck’s end for this purpose. Refer to your user manual for detailed instructions on tightening the belt tension.
- Tip #7: Belt Adjustment (When Needed)
Align the treadmill belt if it drifts to one side. This can happen due to a loose belt or uneven ground. Use the same bolts from tip #6 to tighten: the right bolt for the right drift and the left bolt for the left drift. Refer to the manual for details to avoid warranty issues.
- Tip #8: Belt Replacement (When Needed)
Treadmill belts wear out over time and need replacing. If you’re handy and follow instructions well, you can replace them yourself. Otherwise, consider hiring a professional. Belts are usually covered by warranty for the first few years. A new belt costs around ₹2,000-5,000, so replacing it might be cheaper than buying a new treadmill if the motor and deck are good.
- Tip #9: Use a Surge Protector
Protect your treadmill’s electronics with a surge protector to avoid damage from power surges. Unplugging when not in use isn’t necessary with a surge protector.
- Tip #10: Use a Treadmill Mat
Placing your treadmill on a mat protects your floor from damage and reduces the need for frequent vacuuming underneath the machine. Also, it adds a polished look to your setup, enhancing the overall appearance of your workout space.
Closing Notes
Whether you’re a new treadmill owner or have had yours for years, establishing a regular maintenance routine is essential for keeping your machine in top condition.
These ten tips provide a solid foundation for maintaining your treadmill. For specific guidance, refer to your user manual to ensure you follow the manufacturer’s recommendations.